Protect against adhesion with controls designed for hygiene-critical areas

By Staff Report November 11, 2024 7:13 pm IST

A new series of command and signalling devices offering ergonomics and safety is designed specifically with hygiene in mind. The extensive and standards-compliant series is now part of Schmersal’s range of products. These command and signalling devices are modular in construction and can be adapted flexibly to the requirements of food-processing machine engineering – such as with plug-in contact carriers.

Human-machine interfaces in the food-processing industry must meet certain requirements, such as hygienic design, avoidance of cross-contamination, and dead space-free design.

Characteristic features of the range of command and signalling devices, including the emergency-stop button, for these applications are gap-free transitions between sealing elements and surfaces and an absence of protruding parts. These features help to actively support the cleaning of the command devices, as points at which dirt and contaminants can adhere are reduced to a minimum. Also, the exposed sealing elements must be designed to be much more robust and withstand daily cleaning with a high-pressure water jet aggressive media and disinfection. This means that a high degree of protection, IP69, and high resistance to media are required from all materials.

The degree of protection isn’t everything.

At this point, we must counter a common yet incorrect assumption: the degree of protection is the be-all and end-all. It isn’t. An operating system can have a sufficient degree of protection and yet still be unsuitable for use on food-processing machines because it is a challenge to clean, and the requisite ‘hygienic design’ requirements are not satisfied.

These requirements are also set out in DIN EN ISO 14159 (Safety of machinery – Hygiene requirements for the design of machinery). It must be ensured, for example, that there are no dead spaces in which material residues can settle, or biofilms can form. The surfaces and geometries must be designed in a way that they can be cleaned with ease. It is also important that moisture is unable to accumulate in the enclosures, e.g. those of switches and control panels.

Tried and tested and now improved

Schmersal’s N range of devices has proven itself under these unique conditions in food-processing machine engineering. The N range has been specially developed for hygiene-sensitive applications. It comprises a wide selection of command and signalling devices and various accessories, including emergency-stop and mushroom pushbuttons. With its wide range of different hygienic switchgear devices, the range is unique to the market. The H range is replacing this series for two main reasons. First, new standards for food-processing machines in the Machinery Directive affect the design of command devices, including emergency-stop pushbuttons. Secondly, there was a desire to simplify the assembly of the devices.

A new standard for the HMI of foodprocessing machines

DIN EN 1672-2 outlines hygiene and cleanability requirements for foodprocessing machines. It is based on the globally uniform and familiar EHEDG guidelines of the European Hygienic Engineering and Design Group.

The standard goes into considerable detail. For example, the front ring, which forms the transition from the operating device to the enclosure’s front panel, has a specified minimum angle, which depends on the distance between the operating devices. This helps ensure that personnel can thoroughly clean the gaps on the front panel with a cloth and inspect the devices for damage from all sides.

New development: compliant with standards and more

By the requirements of this new standard, Schmersal has developed a completely new range of control elements for hygiene-sensitive applications, taking into consideration another new regulation (Regulation 10/2011/EU), which formulates requirements for the selection of materials for this particular application.

The new H series contains various types of switchgear: pushbuttons, indicator lights, selector switches, potentiometer drives and emergency-stop devices with the characteristic red mushroom-shaped control element as an impact button.

A comparative glance at the command devices in the N and H ranges highlights the further development that these devices have undergone. For example, the connection of the emergency-stop pushbutton to the front panel has been redesigned. The industry-standard blue seal is now visible and no longer concealed by the front ring. This ensures that the user can check for damage at a glance – another benefit in terms of hygiene. The angle of the stainless steel front ring is consistent with the new version of the standard. The yellow front ring on the emergency-stop device avoids the need for the yellow plate and a dirt-collecting edge, which the yellow plate would cause. On all switches, the designers have paid particular attention to soft transitions without dead spaces and burrs or edges.

The most striking feature is the blue sealing element between the hull and the top of the impact button, which cannot be produced as a single, injection-moulded component but comprises two parts. For the N range, these two parts have been ultrasonically welded. Welding does, however, create open-pored structures at the weld edge – these may be small but undesirable. To resolve this, the top is now latched, with an O-ring to seal the connection, which helps to ensure a higher degree of hygiene.

Modular structure

Aside from the requirements of the standards and ‘hygienic design’ as a design principle, the new H range is entirely modular. All devices – including the master switches – have central nut attachments for the device heads and a snap-on contact carrier. The contact elements are designed as individual contacts and can be variably combined on the snap-on contact carrier, including in piggyback mode. In the first instance, this concept enables very straightforward and rapid installation; secondly, it provides a high degree of flexibility; thirdly, it creates the prerequisite for pre-wiring.

The stainless steel front ring is also not part of the standardisation. However, it enables the use of command devices in areas where the hygiene requirements go beyond those of the meat-processing industry—such as the dairy industry, where machines are even more thoroughly cleaned with much more aggressive media.

One hundred forty-seven different designs of switches are available in the H range, including 26 mushroom pushbuttons, 24 selector switches with two or three positions and four potentiometer-rotary switches. The designer of a food-processing machine can freely decide which type of control element from the H range he wishes to use for the design of the HMI. In addition, and also new, the designer can order these command and signalling devices with individual laser marking, e.g. as an OEM version with a logo.

Integration into machines or surface mounted enclosures

The new hygienic command devices are used in food processing, packaging and other hygienesensitive areas, such as the pharmaceutical industry. If they cannot or should not be integrated directly into the front panel of the machine or control panel, there is also a range of surface-mounted enclosures in the form of the NBG series, which has been developed especially for food-processing machines.

Contact:
Phone: +49 202 6474-0
Email: info@schmersal.com
Website: www.schmersal.com