E2S presents hazardous area integrated warning device assemblies at OTC 2020

By OEM Update Editorial March 4, 2020 6:05 pm IST

E2S Warning Signals is featuring its new range of integrated signalling assemblies at Offshore Technology Conference (OTC) that is being held from 4^th to 7^th May 2020 at Ohio, US. Providing system designers and installers with pre-configured solutions, the new E2S range eliminates the cost of on-site assembly operations whilst guaranteeing that the connections and cabling between devices meet the relevant hazardous area approval requirements and ensuring that all signals are fully tested and certified.

Class I/II Div 1 and IECEx/ATEX Zone 1/21 approved signals are available in multiple configurations of up to seven devices. High-power LED or Xenon beacons (or a mix of technologies) from the D1x marine grade aluminium, the GNEx corrosion proof GRP and the STEx 316L stainless steel families can be assembled to give a solution for any environment. Each device is sealed with a line bushing, and the integral cable loom providing one single point of installation either in the last beacon or optionally in a junction box. Lens colours include amber, blue, clear, green, magenta, red, and yellow. For complete audio-visual signalling, the assembly can also include a multi-stage high output alarm horn with a traditional flare horn or the innovative E2S omni-directional horn.

D2xB1LD3 LED beacon, which at 82.1cd is the brightest UL1971 compliant visual emergency signalling device from any manufacturer for use in a public mode fire alarm installation in hazardous areas. For complete audio-visual warning signalling, the D2xB1LD3 can be combined with a D2xS1 alarm horn sounder with an audible output up to 116 dB (A), 64 embedded alarm tones and four remotely selectable stages/channels to create the D2xC2LD3 combination signal.