Power milling chucks for advance tooling performance

By OEM Update Editorial February 9, 2019 12:10 pm

Seco Tools has introduced its new Power milling chucks, with levels of holding power and transmittable torque, rivalling those of hydraulic and shrink fit holder types for maximised milling performance. Power milling chucks deliver enhanced application flexibility and cost effectiveness while they allow shops to reduce tooling inventories.

The Power milling chuck delivers 5-micron runout accuracy at 3XD. Through direct clamping technology, one Seco chuck can hold cylindrical plain 20 mm, 32 mm, 0.75” and 1.25” and Weldon shank tools of 20 mm and 0.75”. With the use of reduction sleeves, a single chuck also can handle shank diameters in cylindrical plain, Weldon and Whistle Notch tools from 6 mm up to 25 mm, 0.25” up to 1.00”. The chucks accommodate milling tools – for roughing and finishing operations – as well as drilling and tapping tools.

Seco Tools power milling chucks offer shop innovative advantages over standard collet chucks. A nut and needle-bearing design produces superior clamping power with minimum tightening force/torque requirements, compared with the steel-to-steel contact on collet chucks.

Optional coolant-stop screws enable power milling chucks to engage through-tool coolant. These Seco chucks require no additional expense for ancillary equipment such as heating or hydraulic units.

For more details, contact:
Seco Tools India (P) Ltd.,
Tel: 02137-667300
Email: seco.india@secotools.com