Alliance presents versatile Allflex flexible gear couplings

By admin February 12, 2015 1:03 pm

 Alliance Engineering Company, established in 1967, is an ISO 9001-2008 certified company. Today it is one of the largest manufacturers of gear couplings, spindle couplings and torsion shaft type couplings with brand name ALLFLEX. Its factory is situated in the Dombivali Industrial area of MIDC, about 50 km from Mumbai. It is equipped with 12 gear hobbing and gear shaping machines, radial drills and lathes.
The company focuses on maintaining strict quality control during machining, heat treatment and gear cutting. Its marketing office is in Dadar, Mumbai with agents in Kolkata, Delhi, Bangalore, Indore and Bangladesh.
Allflex flexible gear couplingsThe fundamental characteristic of Allflex flexible gear couplings is their high torque to size ratio, thus offering a compact asembly capable of both high loads and high speeds. The design of these couplings is such that it accomodates angular, offset or combined angular-offset misalignment within allowable ratings and permits axial float or thermal expansion of connected shafts.
ConstructionFull gear type AFG Allflex flexible gear coupling consists of two identical toothed hubs, two identical flanged sleeves with internal teeth, a flange gasket, a set if flange bolts nuts and lockwashers, four lube plugs with alluminium gaskets and two oil/grease retaining Nitrile O rings over the hubs.  The use of O rings for sealing of oil/grease eliminates the necessity of dismantling the hubs from shafts for changing the oil retaining O rings.
Size selectionThe specification sheets give the maximum torque, bore and RPM capacities of individual couplings. To arrive at final size, procedure given below should be followed:• Calculate the effective torque to be transmitted by formula:

Advertising

Your future advertising space? Our media data